A dart board height measurement is based on the height of the center bullseye on a steel-tip dart board, not on the height of the center of a soft-tip board. Usually, the center bullseye of a soft-tip board is 8′, while the height of a steel-tip dartboard is 5’8″.
When choosing the correct height for your dart board, consider the quality and durability of the product. The bullseye is usually five feet eight inches high, and you should install a wall bracket that fits perfectly. The bracket should also be mounted so that the center of the bullseye is five feet eight inches off the ground. After installation, the dartboard should be lined up so that it points in the direction you want. Once the board is installed, check for proper alignment of the center of the bullseye and line up the darts with the wall bracket.
The height of your dart board will determine your playing comfort and safety. To make sure you’re playing at the proper height, try several different ones, and if necessary, adjust them accordingly. Remember to take into account the height of the board and your height before purchasing it. By selecting the right height, you will get the most enjoyment out of your game and prevent any possible injuries. However, keep in mind that this is a personal choice and should be determined carefully.
The correct height of a dartboard varies by manufacturer. The official height of a dart board is 173cm (5 feet 8 inches) from the floor. If you’re playing with a dartboard that is too high, you might need to consider using a smaller one. The official height of a dartboard is approximately five feet eight inches, and the distance between the bullseye and the oche is nine feet seven inches.